T40-11 BT40-11 FT40-11 low noise blower fan Application
T40 type ventilator can be used for ventilation in general factories, warehouses, offices and residences or to enhance heat dissipation.
Structure type
If the casing is removed, it can be used as a free fan.
It can be installed in series at intervals in a longer exhaust pipe to increase the wind pressure in the pipe.
Utilization of fan
Operation is permitted only when the fan is in perfectly normal condition.
It is required to check each part of the fan for normality in case of startup of the fan upon maintenance.
The fan shall be cleaned regularly and the dust, dirt and other impurities inside conveying pipeline shall be removed at regular interval to prevent rust.
It is not allowable to repair the fan when it is in operation.
A throttling device may be used for adjustment in case of excessive flow which not in compliance with operating requirements or smaller flow required in a short time.
The fan shall be immediately stopped for inspection in case of abnormality during its startup, shutdown or operation.
Performance parameters of the fan
No | r/min | Blade angle | Pa | m3/h | KW | Equipped with motor | |||
quantity （indivual） | angle 。 | model | kw | ||||||
2.5 | 2900 | 4 | 15 | 125 | 0.314 | 0.0578 | AO25612 | 0.09 | |
20 | 138 | 0.403 | 0.0783 | AO25612 | 0.09 | ||||
25 | 140 | 0.517 | 0.0992 | AO25622 | 0.12 | ||||
30 | 149 | 0.558 | 0.1145 | AO25612 | 0.12 | ||||
35 | 184 | 0.631 | 0.1657 | AO26312 | 0.18 | ||||
1450 | 4 | 15 | 31 | 0.157 | 0.0072 | AO25014 | 0.025 | ||
20 | 34 | 0.201 | 0.0098 | ||||||
25 | 35 | 0.259 | 0.0124 | ||||||
30 | 37 | 0.281 | 0.0143 | ||||||
35 | 46 | 0.317 | 0.0207 | ||||||
3 | 2900 | 4 | 15 | 180 | 0.542 | 0.144 | AO26312 | 0.180 | |
20 | 199 | 0.694 | 0.195 | AO26322 | 0.25 | ||||
25 | 202 | 0.894 | 0.247 | AO26322 | 0.25 | ||||
30 | 215 | 0.967 | 0.285 | AO27112 | 0.37 | ||||
35 | 266 | 1.092 | 0.413 | AO27122 | 0.55 | ||||
1450 | 4 | 15 | 45 | 0.271 | 0.0180 | AO25624 | 0.09 | ||
20 | 50 | 0.347 | 0.0244 | ||||||
25 | 51 | 0.447 | 0.0308 | ||||||
30 | 54 | 0.483 | 0.0356 | ||||||
35 | 67 | 0.544 | 0.0516 | ||||||
3.5 | 2900 | 4 | 15 | 245 | 0.861 | 0.311 | AO27122 | 0.37 | |
20 | 272 | 1.103 | 0.422 | AO27122 | 0.55 | ||||
25 | 274 | 1.422 | 0.533 | AO27122 | 0.55 | ||||
30 | 292 | 1.533 | 0.615 | AO28012 | 0.75 | ||||
35 | 363 | 1.733 | 0.892 | Y802-2 | 1.1 | ||||
1450 | 4 | 15 | 62 | 0.431 | 0.0389 | AO25614 | 0.06 | ||
20 | 68 | 0.550 | 0.0528 | AO25614 | 0.06 | ||||
25 | 69 | 0.711 | 0.0666 | AO25624 | 0.09 | ||||
30 | 74 | 0.767 | 0.0769 | AO25624 | 0.09 | ||||
35 | 90 | 0.867 | 0.1113 | AO26314 | 0.12 | ||||
4 | 2900 | 4 | 15 | 321 | 1.286 | 0.605 | Y802-2 | 1.1 | |
20 | 355 | 1.644 | 0.822 | Y802-2 | 1.1 | ||||
25 | 359 | 2.122 | 1.039 | Y802-2 | 1.1 | ||||
30 | 382 | 2.289 | 1.200 | Y90S-2 | 1.5 | ||||
35 | 473 | 2.586 | 1.732 | Y90L-2 | 2.2 | ||||
1450 | 4 | 15 | 80 | 0.644 | 0.0756 | AO27144 | 0.25 | ||
20 | 88 | 0.822 | 0.1027 | ||||||
25 | 90 | 1.061 | 0.1299 | ||||||
30 | 95 | 1.144 | 0.1500 | ||||||
35 | 119 | 1.294 | 0.2168 | ||||||
5 | 1450 | 4 | 15 | 125 | 1.256 | 0.231 | A802-4 | 0.75 | |
20 | 138 | 1.608 | 0.314 | ||||||
25 | 140 | 2.069 | 0.396 | ||||||
30 | 149 | 2.236 | 0.457 | ||||||
35 | 184 | 2.525 | 0.662 | ||||||
960 | 4 | 15 | 54 | 0.831 | 0.0669 | Y90S-6 | 0.25 | ||
20 | 61 | 1.064 | 0.0909 | ||||||
25 | 62 | 1.372 | 0.1149 | ||||||
30 | 66 | 1.481 | 0.1327 | ||||||
35 | 81 | 1.672 | 0.1920 | ||||||
6 | 1450 | 4 | 15 | 180 | 2.169 | 0.575 | Y90S-4 | 1.1 | |
20 | 200 | 2.775 | 0.780 | ||||||
25 | 202 | 3.583 | 0.986 | ||||||
30 | 215 | 3.861 | 1.138 | Y90L-4 | 1.5 | ||||
35 | 267 | 4.361 | 1.650 | Y100L1-4 | 2.2 | ||||
960 | 4 | 15 | 79 | 1.433 | 0.167 | Y90S-6 | 0.75 | ||
20 | 87 | 1.836 | 0.227 | ||||||
25 | 88 | 2.364 | 0.286 | ||||||
30 | 94 | 2.556 | 0.331 | ||||||
35 | 117 | 2.889 | 0.476 | ||||||
7 | 1450 | 4 | 15 | 245 | 3.444 | 1.240 | Y90L-4 | 1.5 | |
20 | 272 | 4.417 | 1.690 | ||||||
25 | 274 | 5.694 | 2.130 | Y100L1-4 | 2.2 | ||||
30 | 294 | 6.139 | 2.470 | Y100L2-4 | 3 | ||||
35 | 363 | 6.944 | 3.570 | Y112M-4 | 4 | ||||
960 | 4 | 15 | 108 | 2.278 | 0.360 | Y90S-6 | 0.75 | ||
20 | 119 | 2.917 | 0.490 | ||||||
25 | 121 | 3.75 | 0.619 | ||||||
30 | 128 | 4.056 | 0.715 | ||||||
35 | 159 | 4.583 | 1.034 | ||||||
8 | 1450 | 4 | 15 | 321 | 5.139 | 2.430 | Y100L2-4 | 3 | |
20 | 355 | 6.583 | 3.290 | Y112M-4 | 4 | ||||
25 | 359 | 8.472 | 4.160 | Y132S-4 | 5.5 | ||||
30 | 381 | 9.167 | 4.810 | ||||||
35 | 473 | 4.583 | 6.960 | Y132M-4 | 7.5 | ||||
960 | 4 | 15 | 140 | 3.417 | 0.703 | Y90L-6 | 1.1 | ||
20 | 156 | 4.361 | 0.954 | ||||||
25 | 158 | 5.611 | 1.210 | Y100L-6 | 1.5 | ||||
30 | 168 | 6.056 | 1.400 | ||||||
35 | 208 | 6.861 | 2.020 | Y112M-6 | 2.2 | ||||
9 | 960 | 4 | 15 | 177 | 4.833 | 1.270 | Y100L-6 | 1.5 | |
20 | 197 | 6.194 | 1.720 | Y112M-6 | 2.2 | ||||
25 | 199 | 7.972 | 2.180 | Y132S-6 | 3 | ||||
30 | 212 | 8.639 | 2.510 | ||||||
35 | 263 | 9.75 | 3.640 | Y132M-6 | 4 | ||||
10 | 960 | 4 | 15 | 220 | 6.667 | 2.150 | Y112M-6 | 2.2 | |
20 | 243 | 8.528 | 2.910 | Y132S-6 | 3 | ||||
25 | 246 | 10.972 | 3.680 | Y132M1-6 | 4 | ||||
30 | 262 | 11.861 | 4.260 | Y132M2-6 | 5.5 | ||||
35 | 323 | 12.389 | 6.150 | Y160M2-6 | 7.5 | ||||
T40-11 BT40-11 FT40-11 low noise blower fan Application
T40 type ventilator can be used for ventilation in general factories, warehouses, offices and residences or to enhance heat dissipation.
Structure type
If the casing is removed, it can be used as a free fan.
It can be installed in series at intervals in a longer exhaust pipe to increase the wind pressure in the pipe.
Utilization of fan
Operation is permitted only when the fan is in perfectly normal condition.
It is required to check each part of the fan for normality in case of startup of the fan upon maintenance.
The fan shall be cleaned regularly and the dust, dirt and other impurities inside conveying pipeline shall be removed at regular interval to prevent rust.
It is not allowable to repair the fan when it is in operation.
A throttling device may be used for adjustment in case of excessive flow which not in compliance with operating requirements or smaller flow required in a short time.
The fan shall be immediately stopped for inspection in case of abnormality during its startup, shutdown or operation.
Performance parameters of the fan
No | r/min | Blade angle | Pa | m3/h | KW | Equipped with motor | |||
quantity （indivual） | angle 。 | model | kw | ||||||
2.5 | 2900 | 4 | 15 | 125 | 0.314 | 0.0578 | AO25612 | 0.09 | |
20 | 138 | 0.403 | 0.0783 | AO25612 | 0.09 | ||||
25 | 140 | 0.517 | 0.0992 | AO25622 | 0.12 | ||||
30 | 149 | 0.558 | 0.1145 | AO25612 | 0.12 | ||||
35 | 184 | 0.631 | 0.1657 | AO26312 | 0.18 | ||||
1450 | 4 | 15 | 31 | 0.157 | 0.0072 | AO25014 | 0.025 | ||
20 | 34 | 0.201 | 0.0098 | ||||||
25 | 35 | 0.259 | 0.0124 | ||||||
30 | 37 | 0.281 | 0.0143 | ||||||
35 | 46 | 0.317 | 0.0207 | ||||||
3 | 2900 | 4 | 15 | 180 | 0.542 | 0.144 | AO26312 | 0.180 | |
20 | 199 | 0.694 | 0.195 | AO26322 | 0.25 | ||||
25 | 202 | 0.894 | 0.247 | AO26322 | 0.25 | ||||
30 | 215 | 0.967 | 0.285 | AO27112 | 0.37 | ||||
35 | 266 | 1.092 | 0.413 | AO27122 | 0.55 | ||||
1450 | 4 | 15 | 45 | 0.271 | 0.0180 | AO25624 | 0.09 | ||
20 | 50 | 0.347 | 0.0244 | ||||||
25 | 51 | 0.447 | 0.0308 | ||||||
30 | 54 | 0.483 | 0.0356 | ||||||
35 | 67 | 0.544 | 0.0516 | ||||||
3.5 | 2900 | 4 | 15 | 245 | 0.861 | 0.311 | AO27122 | 0.37 | |
20 | 272 | 1.103 | 0.422 | AO27122 | 0.55 | ||||
25 | 274 | 1.422 | 0.533 | AO27122 | 0.55 | ||||
30 | 292 | 1.533 | 0.615 | AO28012 | 0.75 | ||||
35 | 363 | 1.733 | 0.892 | Y802-2 | 1.1 | ||||
1450 | 4 | 15 | 62 | 0.431 | 0.0389 | AO25614 | 0.06 | ||
20 | 68 | 0.550 | 0.0528 | AO25614 | 0.06 | ||||
25 | 69 | 0.711 | 0.0666 | AO25624 | 0.09 | ||||
30 | 74 | 0.767 | 0.0769 | AO25624 | 0.09 | ||||
35 | 90 | 0.867 | 0.1113 | AO26314 | 0.12 | ||||
4 | 2900 | 4 | 15 | 321 | 1.286 | 0.605 | Y802-2 | 1.1 | |
20 | 355 | 1.644 | 0.822 | Y802-2 | 1.1 | ||||
25 | 359 | 2.122 | 1.039 | Y802-2 | 1.1 | ||||
30 | 382 | 2.289 | 1.200 | Y90S-2 | 1.5 | ||||
35 | 473 | 2.586 | 1.732 | Y90L-2 | 2.2 | ||||
1450 | 4 | 15 | 80 | 0.644 | 0.0756 | AO27144 | 0.25 | ||
20 | 88 | 0.822 | 0.1027 | ||||||
25 | 90 | 1.061 | 0.1299 | ||||||
30 | 95 | 1.144 | 0.1500 | ||||||
35 | 119 | 1.294 | 0.2168 | ||||||
5 | 1450 | 4 | 15 | 125 | 1.256 | 0.231 | A802-4 | 0.75 | |
20 | 138 | 1.608 | 0.314 | ||||||
25 | 140 | 2.069 | 0.396 | ||||||
30 | 149 | 2.236 | 0.457 | ||||||
35 | 184 | 2.525 | 0.662 | ||||||
960 | 4 | 15 | 54 | 0.831 | 0.0669 | Y90S-6 | 0.25 | ||
20 | 61 | 1.064 | 0.0909 | ||||||
25 | 62 | 1.372 | 0.1149 | ||||||
30 | 66 | 1.481 | 0.1327 | ||||||
35 | 81 | 1.672 | 0.1920 | ||||||
6 | 1450 | 4 | 15 | 180 | 2.169 | 0.575 | Y90S-4 | 1.1 | |
20 | 200 | 2.775 | 0.780 | ||||||
25 | 202 | 3.583 | 0.986 | ||||||
30 | 215 | 3.861 | 1.138 | Y90L-4 | 1.5 | ||||
35 | 267 | 4.361 | 1.650 | Y100L1-4 | 2.2 | ||||
960 | 4 | 15 | 79 | 1.433 | 0.167 | Y90S-6 | 0.75 | ||
20 | 87 | 1.836 | 0.227 | ||||||
25 | 88 | 2.364 | 0.286 | ||||||
30 | 94 | 2.556 | 0.331 | ||||||
35 | 117 | 2.889 | 0.476 | ||||||
7 | 1450 | 4 | 15 | 245 | 3.444 | 1.240 | Y90L-4 | 1.5 | |
20 | 272 | 4.417 | 1.690 | ||||||
25 | 274 | 5.694 | 2.130 | Y100L1-4 | 2.2 | ||||
30 | 294 | 6.139 | 2.470 | Y100L2-4 | 3 | ||||
35 | 363 | 6.944 | 3.570 | Y112M-4 | 4 | ||||
960 | 4 | 15 | 108 | 2.278 | 0.360 | Y90S-6 | 0.75 | ||
20 | 119 | 2.917 | 0.490 | ||||||
25 | 121 | 3.75 | 0.619 | ||||||
30 | 128 | 4.056 | 0.715 | ||||||
35 | 159 | 4.583 | 1.034 | ||||||
8 | 1450 | 4 | 15 | 321 | 5.139 | 2.430 | Y100L2-4 | 3 | |
20 | 355 | 6.583 | 3.290 | Y112M-4 | 4 | ||||
25 | 359 | 8.472 | 4.160 | Y132S-4 | 5.5 | ||||
30 | 381 | 9.167 | 4.810 | ||||||
35 | 473 | 4.583 | 6.960 | Y132M-4 | 7.5 | ||||
960 | 4 | 15 | 140 | 3.417 | 0.703 | Y90L-6 | 1.1 | ||
20 | 156 | 4.361 | 0.954 | ||||||
25 | 158 | 5.611 | 1.210 | Y100L-6 | 1.5 | ||||
30 | 168 | 6.056 | 1.400 | ||||||
35 | 208 | 6.861 | 2.020 | Y112M-6 | 2.2 | ||||
9 | 960 | 4 | 15 | 177 | 4.833 | 1.270 | Y100L-6 | 1.5 | |
20 | 197 | 6.194 | 1.720 | Y112M-6 | 2.2 | ||||
25 | 199 | 7.972 | 2.180 | Y132S-6 | 3 | ||||
30 | 212 | 8.639 | 2.510 | ||||||
35 | 263 | 9.75 | 3.640 | Y132M-6 | 4 | ||||
10 | 960 | 4 | 15 | 220 | 6.667 | 2.150 | Y112M-6 | 2.2 | |
20 | 243 | 8.528 | 2.910 | Y132S-6 | 3 | ||||
25 | 246 | 10.972 | 3.680 | Y132M1-6 | 4 | ||||
30 | 262 | 11.861 | 4.260 | Y132M2-6 | 5.5 | ||||
35 | 323 | 12.389 | 6.150 | Y160M2-6 | 7.5 | ||||
